T-MAX Series

T-MAX MANAGER
The T-Max® Manager is a front desk control unit for the T-Max® 3a timers. It can be connected to up to 64 T-Max® 3as to control up to 64 tanning units in a single salon. It also works with T-Max 3A compatible tanning beds. The display consists of 8, two-digit LEDs along the top of the T-Max® 3a Manager including a Start/Stop and Set button below each display. A vertical row of 8 LEDs indicates which bank of eight beds are being displayed. The T-Max® Manager can be used manually or be controlled with a PC using today's most popular tanning software. Up to eight T-Max® Managers and/or T-Max® Manager Pros can be connected in a single salon.
MANUAL T-MAX MANAGER AND T-MAX 3A


T-MAX 3A TIMER
The T-Max® 3A can operate as a stand-alone timer. Up, Down, and Start/Stop buttons allow for easy control of your tanning bed. Terminals that screw down provide flexible and easy wire connections. All parameters, such as lamp hours, session counts, bed hours, etc. can be accessed and changed right on the T-Max® 3a. All these features provide an easy to install and inexpensive way to control a tanning bed from the front desk of your salon. Up to eight T-Max® Manager Pro and/or T-Max® Manager can be connected to a single salon.
. Also used to interface most tanning beds with a Manager. 10-15 or 20 min. models available.
MANUAL T-MAX MANAGER AND T-MAX 3A

 

T-MAX MANAGER PRO
The T-Max® Manager Pro is a front desk control unit for the T-Max® 3A and T-Max® 3A Intercom Timers. It can be connected to up to 64 T-Max® 3As and/or T-Max® 3A Intercoms to control up to 128 tanning units in a single salon. It also works with T-Max 3A compatible tanning beds. The T-Max® Manager Pro has 64 dual-colored lights showing bed status. A 16x2 easy to read Vacuum Fluorescent Display (VFD) also shows the status of a given bed. A 16 key keypad allows for manual session control. The T-Max® Manager Pro can be used manually or be controlled with a PC using today's most popular tanning software. Up to eight T-Max® Manager Pro and/or T-Max® Managers can be connected to a single salon.

MANUAL T-MAX MANAGER PRO AND T-MAX 3A


T-MAX MONITOR PLUS
The T-Max® Monitor/Plus is a device that connects anywhere in the T-Max® Series and displays the time and status of up to 16 beds. Sixteen two-digit LED displays show the time remaining for active sessions in minutes. The T-Max® Monitor/Plus also shows the clean room and cool-down statuses. A dip-switch allows the salon owner to select which bank of 16 displays the T-Max® Monitor/Plus is displaying; beds 1-16, 17-32, 33-48, 49-64, 65-80, 81-96, 97-112, and 113-128. You can connect as many T-Max® Monitor/Pluses in a single salon as you like.

TMAX- WIRELESS
The AP-900 is compatible with every tanning unit in this catalog. if you wish to use it with older model beds you can simply order them from us. remenber that you need one for your T-max manager and one for each bed. You will also need a 110 volt outlet in each tanning bed room if the tanning bed is not wireless ready. Going wireless is one of the best things you can do for you salon.

Benefits of TMAX-WIRELESS

  • Eliminates the need tou run wires from room to room and up to front counter.
  • No RJ22 cables to purchase.
  • No cost to install the cables.
  • Additional equipment can be added without running more cables.
  • Troubleshooting diagnostics are greatly simplified.
  • Most Important, one bed cannont interrupt funtion of other beds in the salon.
  • Avoidance of catastrophic electrical damage due to lighthing strikes, power surges, etc.

    T-MAX WIRELESS MODULE QUICK INSTALLATION GUIDE